McIntyre Tile Company Inc.

The nations's premier
source of high quality
hand-made ceramic tiles.

Hacienda

Hacienda tile is a handmade porcelain ceramic tile inspired by handmolded tiles of Mexico. This tile is very hard and vitreous. It may be used for floors and walls, outside and inside applications, including swimming pools and spas.

Choose from a comprehensive variety of tile sizes and colors, as well as cut mosaics, relief patterns, and hand-painted designs. These highly fired tiles will suit a wide range of applications.

Glazes Available:

Nominal tile sizes:

1-1/4" x 1-1/4"
1-1/4" x 2-1/2"
2" x 2"
3" x 6"
3" x 6" Nacho
4" x 4"
4" x 4" Pancho
6" x 6"

Trim and Accessories:

SBN is available. Please indicate the orientation of the SBN. Extruded shapes from the McIntyre Classic line are available. Feature strips, carved decoratives and custom colors are all available. Custom sizes are available. Please check with the factory.

Pre-mounted modules available:
Mozaiquitos:

El Camino:

Nacho Combo:

Size & Weights:

Thickness	Weight lb.per SqFt	Thickness	Weight lb.per SqFt	Thickness	Weight lb.per SqFt
10/32	2.7	10/32	3.2	10/32	3.4
10/32	3.2	10/32	3.4	10/32	3.4
10/32	3.2	10/32	3.4	10/32	3.5
10/32	3.3	10/32	3.4	10/32	3.5
10/32	3.3	10/32	3.4	10/32	3.7
10/32	3.3	10/32	3.4	10/32	4.0

Estimated Shipping Weight

UPS Shipments: (Up to 100 lbs.)	LTL Shipments: (Greater than 100 lbs.)

Weight of tile, plus Add: 2lbs. per 35 lbs of material for packaging	Weight of tile, plus Add: 1 lb per 35 lbs of material for packaging, Plus: Add 30 lbs. per 1600 lbs for pallet(s).

Service Charge added for handling. Actual shipping weight determined by scale at the time of shipment.

Specification
General Description
McIntyre HACIENDA TILES are formed from wet clay, hand finished and hand glazed and single fired to 2400 degrees F. Each tile has a flat back and cushioned edge. Custom tiles may be produced at other temperatures and with other processes.

Standard Specifications
McIntyre Tile conforms to ANSI 137.1 as Special Purpose Tile. Our tiles are produced, graded and packed to our stated specifications. When requested by the purchaser prior to production, a Master Grade Certificate may be issued certifying compliance with properties mutually agreed upon by purchaser and McIntyre Tile. Generally, a Master Grade Certificate should be requested when the tile is specified for a commercial floor or any exterior use.

How to Specify
Glazed, high fired Hacienda tile in actual size __________________ (specify actual size) and color___________________ (specify glaze name) as manufactured by McIntyre Tile Company, Healdsburg, California. Tile shall have a flat back, a cushioned edge, and shall be fully vitrified (absorption less than 3%). Tile shall conform to ANSI 137.1 as Special Purpose Tile. Allow 4-6 weeks from time of purchase order to delivery. Sales Terms are 50% down with order, balance COD.

Availability
These tiles are made to order and therefore subject to production limitations and order volume fluctuations. For purposes of specification, a lead time of 4-6 weeks is sufficient in most cases. Check with the factory or your local distributor for verification of delivery.

Color Variation
Most McIntyre glaze colors vary from tile to tile, some more than others. These variations are intentional, resulting from our particular production methods and our choice of raw materials. When specifying a McIntyre glaze, always work from a sampling of 3 or more tiles which represent the range of color you can expect on the job.

Murals
McIntyre murals should be laid out prior to installation to verify the spacing and fit. The tiles surrounding the mural should be carefully chosen to blend with those in the mural itself. Install murals at the same time as surrounding tiles to assure correct fit.

Slip Resistance
If specified when ordered, McIntyre will add an abrasive grit to any glazed tile for use on floors. The grit is either white (pure silica) or black (nickel alloy). The abrasives are most commonly used on shower floors and commercial floor applications.

Crazing
Crazing refers to the hair-line cracks which occur in the glaze surface of some tiles. Certain glazes produced by McIntyre Tile are intentionally crazed for decorative effect. To minimize the possibility for staining, the factory recommends the use of natural gray grout. Penetrating sealers or grout releases may also be used per the manufacturer�s instructions. To highlight the crazing, colored stains may be rubbed into the surface before sealing.

Size Variation
Because of the substantial shrinkage from wet to fired in the manufacturing, McIntyre tiles are subject to size variation. Dimensions on 6x6 and smaller tiles may vary up to 1/16" from the actual size specified. Tile thickness may vary 1/32" from the dimensions specified. Deflection on 12x12 tiles is limited to 1/8" from a straight edge.

Custom Color Development
We specialize in custom color development. Generally, we can match the hue and sheen of a sample submitted. For a fixed development fee, we will conduct a series of glaze tests and make a prototype tile for submittal. Custom glazed tiles made for a job are surcharged 20%. Please allow 2-4 weeks for development time in our glaze lab.

Installation
Installation procedures should conform to the Tile Council of America "Handbook for Ceramic Tile Installation" (current edition). The layout should be evenly spaced on each surface and maximize the use of full tiles. Grout joints should align. Avoid grouping tiles of the same hue or value. Choose stacks of tiles from several different cartons to achieve the best overall blend of color.

Grout Space
McIntyre is sized modular with a square foot space allowing a 3/16" grout throughout. A narrower grout spacing can be used including "tight", however, additional tiles will be required to cover a given area. Close grout spaces accentuate tile irregularities.

Frost Proof
McIntyre Tile has a water absorption of less than 3% (vitreous) and is suitable for use in pools and spas for both interior and exterior applications.

Colored Grouts vs. Natural Gray
The factory recommends natural gray grout for all of its glazes to minimize staining from colored grout pigments. Caution is especially recommended with matte glazes. Test a loose piece of tile before grouting your installation. To reduce staining, use a Grout Release before grouting (except with Copper Flash glaze). Always test before using. Do not apply any materials to your tile without first satisfying yourself by testing, that the result will be satisfactory.

Maintenance
Minimal maintenance is required. Mild soaps should be sufficient for most cleaning. For persistent stains, stronger cleaners (even mild acids) may be used on the tile (except for Metallic glazes), but care must be taken to avoid contact with the grout, especially if a colored grout has been used. Test any cleaners before general use.

Durability Considerations
Depending on specific site conditions, all glazed tile are subject to wear over time. To determine the suitability for specific applications, each McIntyre glaze has been tested and ranked on the MOHS scale and classified according to hardness and recommended use. Light colors and matte glazes are a better choice in heavy use areas rather than dark colors and gloss finished glazes because scratches on the tile surface are less apparent. A means must be provided for people to clean abrasive materials off their shoes before walking on a glazed tile floor.